NZ Roof Tools Takeoff

Guide

Five NZ ribbed profiles and where they fit

Five families in this takeoff. Appearance is last. Cover, min cladding pitch, and check-run come first. Broader notes: NZ longrun profiles.

Profile Cover (library) Min pitch Check run Typical job
Dimond / Metalcraft / Stratco corrugate 762 / 760 / 760 mm 8° 15 m Default Kiwi gable. Not 6°. Dimond vs Metalcraft.
Dimond Six Rib 760 mm (820 overall) 4° 20 m Step down when corrugate fails pitch.
Dimond Hi Five 765 mm (confirm 755) 3° 40 m Deeper five-rib; South Island supply listed. Hi Five.
Metalcraft T-Rib 760 mm 3° 40 m Same CoP row as Hi Five; different roll.
Tray / secret-fix 300 mm placeholder 3° 60 m Override pan width. Tray pitch.

10.8 m ÷ 0.760 m = 14.21 → 15 sheets per plane. Using 820 mm overall under-orders.

Where each one fails

Purlin span and fixing tables are not in this calculator. Open the named row: Dimond corrugate, Metalcraft corrugate, Stratco CGI, Six Rib, Hi Five, T-Rib, secret-fix tray. The profile index lists the same numbers. Then the product sheet and NZMRM CoP.

All guides · Open the takeoff